{"id":3102,"date":"2016-08-26T14:55:00","date_gmt":"2016-08-26T14:55:00","guid":{"rendered":"http:\/\/www.IpsenHarold.com\/?p=719"},"modified":"2024-12-03T17:43:04","modified_gmt":"2024-12-03T17:43:04","slug":"maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls","status":"publish","type":"knowledge-center","link":"https:\/\/ipsenglobal.com\/de\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/","title":{"rendered":"Aufrechterhaltung enger Temperaturtoleranzen: Abstimmung Ihrer DigiTrim-Steuerungen"},"content":{"rendered":"

Die Validierung Ihres Ofens ist ein komplexer Prozess, der Untersuchungen zur Temperaturgleichm\u00e4\u00dfigkeit (TUS) und Systemgenauigkeitstests (SAT) erfordert. Au\u00dferdem m\u00fcssen Sie Ihren Ofen richtig einstellen, indem Sie Ihre PID und DigiTrim\u00ae<\/sup> steuert die Einstellungen. In einem fr\u00fcheren Beitrag haben wir einige der grundlegende Schritte und \u00dcberlegungen zur PID-Abstimmung<\/a>Es ist jedoch wichtig, dass Sie Ihre DigiTrim-Steuerungseinstellungen so anpassen, dass die engstm\u00f6gliche Toleranz erreicht wird, bevor Sie die endg\u00fcltigen PID-Einstellungen vornehmen.<\/p>\n\n\n\n

DigiTrim-Steuerungen sind bei den meisten Ipsen-Vakuum\u00f6fen werkseitig voreingestellt und erm\u00f6glichen Ihnen die Feinabstimmung der Leistungsabgabe an einzelne Heizzonen und stellen sicher, dass alle Heizzonen innerhalb der erforderlichen \u00b1 Toleranz liegen. Die DigiTrim-Steuerung ist eine der Einstellungen, die Sie vornehmen, um die Last auszugleichen und sicherzustellen, dass die Gesamttemperaturgleichm\u00e4\u00dfigkeit innerhalb des gew\u00fcnschten Bereichs liegt (z. B. verlangen die meisten \u00d6fen, dass die Temperaturgleichm\u00e4\u00dfigkeit innerhalb von \u00b110 \u00b0F vom gew\u00fcnschten Sollwert liegt).<\/p>\n\n\n\n

Ipsen hat standardm\u00e4\u00dfig drei Hauptabstimmungsbereiche, auch Trimmzonen genannt, mit den DigiTrim-Reglern verbunden: die vordere, mittlere und hintere Zone. Die prozentuale Leistungsabgabe f\u00fcr jede dieser drei Trimmzonen kann nach Bedarf angepasst werden, um eine engere Temperaturgleichm\u00e4\u00dfigkeit im gesamten Arbeitsbereich zu erreichen. Je nach Auslegung der Heizzone k\u00f6nnen bestimmte Zonen auf 100 Prozent aufw\u00e4rts eingestellt werden, um den W\u00e4rmeverlust auszugleichen und eine gleichm\u00e4\u00dfige Temperatur im gesamten Ofen zu gew\u00e4hrleisten. Die M\u00f6glichkeit, jede einzelne Trimmzone einzustellen, bietet dem Ofenbenutzer au\u00dferdem die Flexibilit\u00e4t, pr\u00e4zise Anpassungen vorzunehmen und eine h\u00f6here Genauigkeit der TUS-Berichte zu gew\u00e4hrleisten.<\/p>\n\n\n\n

Da Sie in der Lage sind, die genaue Zahl f\u00fcr jede Zone zu sehen - anstatt zu versuchen, ein Rheostat einzustellen - k\u00f6nnen Sie die genauen Einstellungen dokumentieren, was eine bessere Wiederholbarkeit erm\u00f6glicht und Sie erkennen l\u00e4sst, ob seit der letzten TUS undokumentierte Einstellungen vorgenommen wurden.<\/p>\n\n\n\n

Bei der Einstellung der DigiTrim-Steuerung ist es auch wichtig zu wissen, dass es f\u00fcnf einstellbare Temperaturbereiche gibt, um die Temperaturen und Rampeneinstellungen des Ofens einzustellen und m\u00f6gliche \u00dcberschreitungen zu vermeiden. Da dies alles digital erfolgt, k\u00f6nnen Sie verschiedene Einstellungen f\u00fcr unterschiedliche Temperaturbereiche vornehmen, so dass Sie eine Vielzahl von Lastkonfigurationen betreiben k\u00f6nnen - alle bei den gew\u00fcnschten Temperaturen.<\/p>\n\n\n\n

Es ist jedoch wichtig, dass Sie vor Beginn der Untersuchungen wissen, in welchen Temperaturbereichen Sie sich bewegen werden, und dass Sie den gew\u00fcnschten Toleranzbereich f\u00fcr Ihr spezifisches Ger\u00e4t kennen. Der Grund daf\u00fcr ist, dass bestimmte Spezifikationen zul\u00e4ssige Temperaturbereiche festlegen. Die Norm AMS 2750 schreibt beispielsweise vor, dass Sie bestimmte Temperaturbereiche und -abweichungen einhalten m\u00fcssen, die f\u00fcr die jeweilige Klassifizierung gelten, die Sie pr\u00fcfen.<\/p>\n\n\n\n

Bew\u00e4hrte Praktiken<\/h4>\n\n\n\n

Bei der Einstellung Ihrer DigiTrim-Steuerungen sollten Sie einige bew\u00e4hrte Verfahren beachten, um den Prozess zu vereinfachen. Es ist jedoch wichtig, sich dar\u00fcber im Klaren zu sein, dass die Einstellung Ihrer Steuerungen immer noch eine zeitliche Belastung darstellt. Im Folgenden werden drei Schritte empfohlen, um den Einstellungsprozess so reibungslos und schnell wie m\u00f6glich zu gestalten:<\/p>\n\n\n\n

    \n
  1. Vor der Herstellung jede<\/strong> Einstellungen, dokumentieren und protokollieren Sie alle vorherigen Einstellungen und lassen Sie dem Ofen vor der Einstellung ausreichend Zeit, sich bei jedem Temperatursollwert zu stabilisieren.<\/li>\n\n\n\n
  2. Nur machen eine Anpassung<\/strong> Dies hilft zu vermeiden, dass man wieder von vorne anfangen muss, weil eine zu gro\u00dfe Anpassung vorgenommen wurde oder weil man die wahre Ursache und Wirkung jedes einzelnen Schrittes in Kombination nicht kennt.<\/li>\n\n\n\n
  3. Lassen Sie den Ofen nach jeder Einstellung einige Minuten lang stabilisieren. mindestens 15 Minuten<\/strong> um einen gleichm\u00e4\u00dfigen W\u00e4rmeverlust zu erreichen; auf diese Weise k\u00f6nnen Sie auch feststellen, ob die vorgenommene Einstellung den gew\u00fcnschten Effekt hat.<\/li>\n<\/ol>\n\n\n\n

    Wenn Sie weitere Unterst\u00fctzung bei der Einstellung Ihrer DigiTrim-Steuerung ben\u00f6tigen, wenden Sie sich bitte an Ipsen unter +49 172 253 3910<\/strong>.<\/p>","protected":false},"excerpt":{"rendered":"

    Die Validierung Ihres Ofens ist ein komplexer Prozess, der Untersuchungen zur Temperaturgleichm\u00e4\u00dfigkeit (TUS) und Systemgenauigkeitstests (SAT) erfordert. Au\u00dferdem m\u00fcssen Sie Ihren Ofen richtig abstimmen, indem Sie die PID- und<\/p>","protected":false},"author":7,"featured_media":723,"menu_order":0,"template":"","meta":{"_acf_changed":false,"_tec_requires_first_save":true,"_searchwp_excluded":"","_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_price":"","_stock":"","_tribe_ticket_header":"","_tribe_default_ticket_provider":"","_tribe_ticket_capacity":"0","_ticket_start_date":"","_ticket_end_date":"","_tribe_ticket_show_description":"","_tribe_ticket_show_not_going":false,"_tribe_ticket_use_global_stock":"","_tribe_ticket_global_stock_level":"","_global_stock_mode":"","_global_stock_cap":"","_tribe_rsvp_for_event":"","_tribe_ticket_going_count":"","_tribe_ticket_not_going_count":"","_tribe_tickets_list":"[]","_tribe_ticket_has_attendee_info_fields":false,"_EventAllDay":false,"_EventTimezone":"","_EventStartDate":"","_EventEndDate":"","_EventStartDateUTC":"","_EventEndDateUTC":"","_EventShowMap":false,"_EventShowMapLink":false,"_EventURL":"","_EventCost":"","_EventCostDescription":"","_EventCurrencySymbol":"","_EventCurrencyCode":"","_EventCurrencyPosition":"","_EventDateTimeSeparator":"","_EventTimeRangeSeparator":"","_EventOrganizerID":[],"_EventVenueID":[],"_OrganizerEmail":"","_OrganizerPhone":"","_OrganizerWebsite":"","_VenueAddress":"","_VenueCity":"","_VenueCountry":"","_VenueProvince":"","_VenueState":"","_VenueZip":"","_VenuePhone":"","_VenueURL":"","_VenueStateProvince":"","_VenueLat":"","_VenueLng":"","_VenueShowMap":false,"_VenueShowMapLink":false,"_tribe_blocks_recurrence_rules":"","_tribe_blocks_recurrence_description":"","_tribe_blocks_recurrence_exclusions":"","_ecp_custom_2":"","footnotes":""},"categories":[558,655,604],"tags":[184,262,281,261,191,75],"class_list":["post-3102","knowledge-center","type-knowledge-center","status-publish","has-post-thumbnail","hentry","category-blog-post","category-controls","category-pyrometry","tag-ams-2750","tag-controls","tag-pid-tuning","tag-sat","tag-tus","tag-vacuum-furnace"],"acf":[],"yoast_head":"\nMaintaining Tight Temperature Tolerances: Tuning Your DigiTrim Controls<\/title>\n<meta name=\"description\" content=\"Tuning the DigiTrim controls settings is an essential step for maintaining tight temperature tolerances and preparing for TUS and SAT.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/ipsenglobal.com\/de\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/\" \/>\n<meta property=\"og:locale\" content=\"de_DE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Maintaining Tight Temperature Tolerances: Tuning Your DigiTrim Controls\" \/>\n<meta property=\"og:description\" content=\"Tuning the DigiTrim controls settings is an essential step for maintaining tight temperature tolerances and preparing for TUS and SAT.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/ipsenglobal.com\/de\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/\" \/>\n<meta property=\"og:site_name\" content=\"Ipsen Global\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/IpsenUSA\" \/>\n<meta property=\"article:modified_time\" content=\"2024-12-03T17:43:04+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:site\" content=\"@ipsenusa\" \/>\n<meta name=\"twitter:label1\" content=\"Gesch\u00e4tzte Lesezeit\" \/>\n\t<meta name=\"twitter:data1\" content=\"3\u00a0Minuten\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"TechArticle\",\"@id\":\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/\"},\"author\":{\"name\":\"Courtney Kerch\",\"@id\":\"https:\\\/\\\/dipsen.wpengine.com\\\/#\\\/schema\\\/person\\\/8fb2c2ce715f8b2c86dd1ab9f3021543\"},\"headline\":\"Maintaining Tight Temperature Tolerances: Tuning Your DigiTrim Controls\",\"datePublished\":\"2016-08-26T14:55:00+00:00\",\"dateModified\":\"2024-12-03T17:43:04+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/\"},\"wordCount\":611,\"publisher\":{\"@id\":\"https:\\\/\\\/dipsen.wpengine.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/#primaryimage\"},\"thumbnailUrl\":\"\",\"keywords\":[\"AMS 2750\",\"controls\",\"PID tuning\",\"SAT\",\"TUS\",\"vacuum furnace\"],\"articleSection\":[\"Blog Post\",\"Controls\",\"Pyrometry\"],\"inLanguage\":\"de\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/\",\"url\":\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/\",\"name\":\"Maintaining Tight Temperature Tolerances: Tuning Your DigiTrim Controls\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/dipsen.wpengine.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/#primaryimage\"},\"thumbnailUrl\":\"\",\"datePublished\":\"2016-08-26T14:55:00+00:00\",\"dateModified\":\"2024-12-03T17:43:04+00:00\",\"description\":\"Tuning the DigiTrim controls settings is an essential step for maintaining tight temperature tolerances and preparing for TUS and SAT.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/#breadcrumb\"},\"inLanguage\":\"de\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/#primaryimage\",\"url\":\"\",\"contentUrl\":\"\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/ipsenglobal.com\\\/knowledge-center\\\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/ipsenglobal.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Knowledge Center\",\"item\":\"https:\\\/\\\/dipsen.wpengine.com\\\/knowledge-center\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Maintaining Tight Temperature Tolerances: Tuning Your DigiTrim Controls\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/dipsen.wpengine.com\\\/#website\",\"url\":\"https:\\\/\\\/dipsen.wpengine.com\\\/\",\"name\":\"Ipsen Global\",\"description\":\"Strengthening Innovation Worldwide\",\"publisher\":{\"@id\":\"https:\\\/\\\/dipsen.wpengine.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/dipsen.wpengine.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"de\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/dipsen.wpengine.com\\\/#organization\",\"name\":\"Ipsen\",\"url\":\"https:\\\/\\\/dipsen.wpengine.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\\\/\\\/dipsen.wpengine.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/ipsenglobal.com\\\/wp-content\\\/uploads\\\/2022\\\/10\\\/Ipsen-Pantone186C_Large_W_White.jpg\",\"contentUrl\":\"https:\\\/\\\/ipsenglobal.com\\\/wp-content\\\/uploads\\\/2022\\\/10\\\/Ipsen-Pantone186C_Large_W_White.jpg\",\"width\":1090,\"height\":545,\"caption\":\"Ipsen\"},\"image\":{\"@id\":\"https:\\\/\\\/dipsen.wpengine.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/IpsenUSA\",\"https:\\\/\\\/x.com\\\/ipsenusa\",\"https:\\\/\\\/www.instagram.com\\\/ipsenusa\\\/\",\"https:\\\/\\\/www.youtube.com\\\/user\\\/ipsenvideos\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/dipsen.wpengine.com\\\/#\\\/schema\\\/person\\\/8fb2c2ce715f8b2c86dd1ab9f3021543\",\"name\":\"Courtney Kerch\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"de\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/046e31caea38a69059edfb28090efb5f0af1696fd41381c07821ac786e7ff9c9?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/046e31caea38a69059edfb28090efb5f0af1696fd41381c07821ac786e7ff9c9?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/046e31caea38a69059edfb28090efb5f0af1696fd41381c07821ac786e7ff9c9?s=96&d=mm&r=g\",\"caption\":\"Courtney Kerch\"},\"url\":\"https:\\\/\\\/ipsenglobal.com\\\/de\\\/author\\\/ckerch\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Aufrechterhaltung enger Temperaturtoleranzen: Abstimmung Ihrer DigiTrim-Steuerungen","description":"Die Abstimmung der DigiTrim-Steuerungseinstellungen ist ein wesentlicher Schritt zur Einhaltung enger Temperaturtoleranzen und zur Vorbereitung auf TUS und SAT.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/ipsenglobal.com\/de\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/","og_locale":"de_DE","og_type":"article","og_title":"Maintaining Tight Temperature Tolerances: Tuning Your DigiTrim Controls","og_description":"Tuning the DigiTrim controls settings is an essential step for maintaining tight temperature tolerances and preparing for TUS and SAT.","og_url":"https:\/\/ipsenglobal.com\/de\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/","og_site_name":"Ipsen Global","article_publisher":"https:\/\/www.facebook.com\/IpsenUSA","article_modified_time":"2024-12-03T17:43:04+00:00","twitter_card":"summary_large_image","twitter_site":"@ipsenusa","twitter_misc":{"Gesch\u00e4tzte Lesezeit":"3\u00a0Minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"TechArticle","@id":"https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/#article","isPartOf":{"@id":"https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/"},"author":{"name":"Courtney Kerch","@id":"https:\/\/dipsen.wpengine.com\/#\/schema\/person\/8fb2c2ce715f8b2c86dd1ab9f3021543"},"headline":"Maintaining Tight Temperature Tolerances: Tuning Your DigiTrim Controls","datePublished":"2016-08-26T14:55:00+00:00","dateModified":"2024-12-03T17:43:04+00:00","mainEntityOfPage":{"@id":"https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/"},"wordCount":611,"publisher":{"@id":"https:\/\/dipsen.wpengine.com\/#organization"},"image":{"@id":"https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/#primaryimage"},"thumbnailUrl":"","keywords":["AMS 2750","controls","PID tuning","SAT","TUS","vacuum furnace"],"articleSection":["Blog Post","Controls","Pyrometry"],"inLanguage":"de"},{"@type":"WebPage","@id":"https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/","url":"https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/","name":"Aufrechterhaltung enger Temperaturtoleranzen: Abstimmung Ihrer DigiTrim-Steuerungen","isPartOf":{"@id":"https:\/\/dipsen.wpengine.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/#primaryimage"},"image":{"@id":"https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/#primaryimage"},"thumbnailUrl":"","datePublished":"2016-08-26T14:55:00+00:00","dateModified":"2024-12-03T17:43:04+00:00","description":"Die Abstimmung der DigiTrim-Steuerungseinstellungen ist ein wesentlicher Schritt zur Einhaltung enger Temperaturtoleranzen und zur Vorbereitung auf TUS und SAT.","breadcrumb":{"@id":"https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/#breadcrumb"},"inLanguage":"de","potentialAction":[{"@type":"ReadAction","target":["https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/"]}]},{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/#primaryimage","url":"","contentUrl":""},{"@type":"BreadcrumbList","@id":"https:\/\/ipsenglobal.com\/knowledge-center\/maintaining-tight-temperature-tolerances-tuning-your-digitrim-controls\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/ipsenglobal.com\/"},{"@type":"ListItem","position":2,"name":"Knowledge Center","item":"https:\/\/dipsen.wpengine.com\/knowledge-center\/"},{"@type":"ListItem","position":3,"name":"Maintaining Tight Temperature Tolerances: Tuning Your DigiTrim Controls"}]},{"@type":"WebSite","@id":"https:\/\/dipsen.wpengine.com\/#website","url":"https:\/\/dipsen.wpengine.com\/","name":"Ipsen Global","description":"St\u00e4rkung der Innovation weltweit","publisher":{"@id":"https:\/\/dipsen.wpengine.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/dipsen.wpengine.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"de"},{"@type":"Organization","@id":"https:\/\/dipsen.wpengine.com\/#organization","name":"Ipsen","url":"https:\/\/dipsen.wpengine.com\/","logo":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/dipsen.wpengine.com\/#\/schema\/logo\/image\/","url":"https:\/\/ipsenglobal.com\/wp-content\/uploads\/2022\/10\/Ipsen-Pantone186C_Large_W_White.jpg","contentUrl":"https:\/\/ipsenglobal.com\/wp-content\/uploads\/2022\/10\/Ipsen-Pantone186C_Large_W_White.jpg","width":1090,"height":545,"caption":"Ipsen"},"image":{"@id":"https:\/\/dipsen.wpengine.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/IpsenUSA","https:\/\/x.com\/ipsenusa","https:\/\/www.instagram.com\/ipsenusa\/","https:\/\/www.youtube.com\/user\/ipsenvideos"]},{"@type":"Person","@id":"https:\/\/dipsen.wpengine.com\/#\/schema\/person\/8fb2c2ce715f8b2c86dd1ab9f3021543","name":"Courtney Kerch","image":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/secure.gravatar.com\/avatar\/046e31caea38a69059edfb28090efb5f0af1696fd41381c07821ac786e7ff9c9?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/046e31caea38a69059edfb28090efb5f0af1696fd41381c07821ac786e7ff9c9?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/046e31caea38a69059edfb28090efb5f0af1696fd41381c07821ac786e7ff9c9?s=96&d=mm&r=g","caption":"Courtney Kerch"},"url":"https:\/\/ipsenglobal.com\/de\/author\/ckerch\/"}]}},"taxonomy_info":{"category":[{"value":558,"label":"Blog Post"},{"value":655,"label":"Controls"},{"value":604,"label":"Pyrometry"}],"post_tag":[{"value":184,"label":"AMS 2750"},{"value":262,"label":"controls"},{"value":281,"label":"PID tuning"},{"value":261,"label":"SAT"},{"value":191,"label":"TUS"},{"value":75,"label":"vacuum furnace"}]},"featured_image_src_large":false,"author_info":{"display_name":"Courtney Kerch","author_link":"https:\/\/ipsenglobal.com\/de\/author\/ckerch\/"},"comment_info":"","_links":{"self":[{"href":"https:\/\/ipsenglobal.com\/de\/wp-json\/wp\/v2\/knowledge-center\/3102","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ipsenglobal.com\/de\/wp-json\/wp\/v2\/knowledge-center"}],"about":[{"href":"https:\/\/ipsenglobal.com\/de\/wp-json\/wp\/v2\/types\/knowledge-center"}],"author":[{"embeddable":true,"href":"https:\/\/ipsenglobal.com\/de\/wp-json\/wp\/v2\/users\/7"}],"version-history":[{"count":1,"href":"https:\/\/ipsenglobal.com\/de\/wp-json\/wp\/v2\/knowledge-center\/3102\/revisions"}],"predecessor-version":[{"id":9724,"href":"https:\/\/ipsenglobal.com\/de\/wp-json\/wp\/v2\/knowledge-center\/3102\/revisions\/9724"}],"wp:attachment":[{"href":"https:\/\/ipsenglobal.com\/de\/wp-json\/wp\/v2\/media?parent=3102"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ipsenglobal.com\/de\/wp-json\/wp\/v2\/categories?post=3102"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ipsenglobal.com\/de\/wp-json\/wp\/v2\/tags?post=3102"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}